| Designed for light-duty applications. Payloads under 50 lbs. can be at high speed. Upgraded design for up to 4,500 inch lbs. payload, limited to 15 fpm vertical. Rated for 100 lbs. total payload at twenty inches of moment beyond internal requirement and is comprised of the following elements:
Typical configuration:
HORIZONTAL AXIS
Length: range of travel plus 28 inches; overall travel limited to 100 feet
Width: 20 inches Column and Frame, plus footplate
Construction: mild steel, with polyester powder coat
Max operating speed: 120 fpm (dependent on fixturing)
Driven by a TENV 90 VDC motor via steel reinforced polyurethane belt. The frame is configured in ten foot sections. Each shares two vertical legs.
VERTICAL AXIS
Stroke: up to 72 inches, standard at 30 and 60 inches
Minimum headroom: highest obstruction + stroke + 20 inches
Standard operating speed 15 fpm, up to 50 fpm for payloads under 50 lbs.
Column shell: mild steel with polyester powder coat
Chain driven via TENV 90 VDC motor. Cantilevered arm presented through a slot in the front face of the column.
ELECTRICAL
Construction: NEMA 12, epoxy painted mild steel over powder coat base. E-Stop.
Power supply: 115 volt, 1 phase, 60 Hertz, 10 Amps per head.
Controls: PLC or PC-based.
TYPICAL OPTIONS
• Multiple heads
• Motion multiplier
• Barrel rotation
• Manual Operation Pendant with additional E-Stop; boom-mounted or remote
• Flashing Light during motion
|
