| Sidearm for high production applications ranging from 500 Ibs. to 1000 lbs. A robust design for general industrial applications. Utilizes AC drives and absolute closed-loop positioning for both axes.
Typical configuration:
HORIZONTAL AXIS
Length: Unlimited travel length, generally frame is three feet longer than travel requirement
Construction: Steel, with polyester powder coat
Maximum operator speed: 150 fpm (dependent on fixturing)
Drive: 1-1/2 hp AC motor with AC frequency inverter, absolute encoder positioning
Mounting: Frame is configured in modules with vertical legs, typically five feet on center
VERTICAL AXIS
Stroke: 30+ inches
Minimum headroom: Tank height + stroke requirement + two feet
Construction: Steel, with polyester powder coat
Maximum operator speed: 50 fpm (dependent on fixturing)
Drive: Polypropylene webbed belt or triplex chain which is driven by a 1-1/2 hp AC motor with AC frequency inverter, absolute encoder positioning
ELECTRICAL
Panel construction: NEMA 12, epoxy painted mild steel over powder coated base. NEMA 4 upon request
Power supply: 480 volt, 3 phase, 60 Hertz, 10 Amps per carrier (240 VAC or alternates are available)
Controls: PC Iinterface standard
TYPICAL OPTIONS
• Multiple transports
• Barrel rotation
• Manual Operation Pendant with additional E-Stop; boom-mounted or remote
• Flashing Light during motion
|
